Transistor Analyzer

Transistor Analyzer

---

Transistor Analyzer provides the facilities for Transistor Static Test and Curve Tracing. These two are generally the most conventional tests used in laboratories. It is designed to show the complete arrangements of all the test methods and procedures. It is a comprehensive solution for study of Transistor Testers and Testing of Transistor both. It supports both NPN and PNP transistors.

FEATURES:-
Single platform covers important Transistor tests
On-board Curve Tracer circuit
Comprehensive test circuit schematics shown over mimic
Onboard micro-ammeter for low current measurement
Onboard NPN /PNP selection for each test
Built-in DC Power Supply
Transistor Tests Supported are:-
Short Circuit test for NPN /PNP Transistor
Open Circuit test for NPN / PNP Transistor
ICBO / I CEO test for NPN / PNP Transistor
HFE (DC) test for NPN / PNP Transistor
Common Emitter characteristics curve plotting
Determination of Transistor Parameters from CE characteristics
Transistor Curve Tracer:-
Shows IC vs VCE family of curve on Oscilloscope
Support both NPN and PNP Transistor
Control knobs for Amplitude, number of base steps and sweep frequency selection for curve tracing

SCOPE OF LEARNING:-
Short Circuit test for NPN /PNP Transistor
Open Circuit test for NPN / PNP Transistor
ICBO / ICEO test for NPN / PNP Transistor CBO CEO
HFE (DC) test for NPN / PNP Transistor FE
NPN Transistor C-E Characteristics curve tracing using Curve Tracer
PNP Transistor C-E Characteristics curve tracing using Curve Tracer

TECHNICAL SPECIFICATIONS:-
Step Frequency: 500 Hz – 4 KHz
Sweep Frequency: 500 Hz – 4 KHz
Collector sweep amplitude: 0 – 20 V No. of steps:0 – 16 steps (selectable)
Transistor Types: Only small plastic packages having power ratings below 500 mW
On board micro-ammeter: 0 – 300 µA (moving coil type)
Collector-base Supply: ± 12 V max
Emitter-base Supply: ± 5 V max
Test Points: 16 nos
Interconnections: 2 mm socket
Power Supply: 230 V ± 10%, 50 / 60 Hz
Power Consumption: 5 VA approximately